The operation instructions and 5 points for attention of the heat transfer printing machine.

Before that, I have introduced the working principle and advantages of the heat transfer press. Next, I will talk about the operation instructions of the heat transfer press and the matters needing attention in the use process.

1, hand plug power, turn on the power switch, the power indicator light will then light up.

2. Adjust the thermostat to the required temperature. When the temperature reaches the set temperature, the indication of the upper part of the thermostat is extinguished, and then the thermostat can start to work.

3, adjust the time controller to the required time.

4. Place the clothes flat on the lower ironing board, then put on the ironing paper (pay attention to the positive and negative sides of the ironing paper), press the handle down forcefully until the end point. Attention: no more than 30 kilograms of force, otherwise it may cause the handle to deform.

5. When the time of indicating the time controller for hot stamping arrives, the buzzer rings and the handle is lifted up to its original position.

Matters needing attention in the operation of heat transfer printing machine:

1. Pressure: If the pressure is not enough or too large, the pressure regulating knob behind the adjusting machine will increase the pressure clockwise; otherwise, reduce the pressure;

2. Time: When the stamping time arrives and the buzzer does not ring or keeps ringing, if not moderate, it must be adjusted to the appropriate position.

3. Temperature: When the temperature is reached, the thermostat pointer points to the position of "180 C" (about 5 minutes). If the starting thermometer rises and the heating plate does not heat, please check the circuit.

4. When the handle is pressed down to the bottom, the hand is released and the handle automatically rises. Please adjust the adjustment knob downward.

5, when the hot stamping is finished, the handle is lifted up and feels heavy, the adjusting knob can be adjusted downwards.

Scientific and reasonable operation of heat transfer printer can not only improve work efficiency, extend working life, but also ensure personal safety in the process of operation. I hope you will pay attention to it.