Ceramic grinding machine

The rolls of the ceramic grinder are made of ceramics. They have good wear resistance and corrosion resistance. They do not heat when working. They are the most effective grinding and dispersing equipment for high viscosity materials. Widely used in the production of various inks, paints, pigments, soaps, artificial leather, plastics, lubricants, chocolate and other paste materials. It is especially suitable for grinding products with high viscosity and fine fineness.

Ceramic grinding is an important processing method in ultra-precision machining. Its advantages are high processing accuracy and wide range of processing materials.

A ceramic grinding machine is a grinding machine that grinds the surface of the workpiece by applying or embedding abrasive tools. It is mainly used for grinding high precision planes, inner and outer cylindrical surfaces, conical surfaces, spherical surfaces, threaded surfaces and other profiles in workpieces.

The ceramic grinding machine has the following characteristics:

1, ceramic grinding machine for high-speed grinding machine, precision grinding machine. The belt is made of sand cloth, and the electrical appliances are sprayed by Japan and Quan, Fuji and the whole machine. The color is computer color.

2. The guide rail is Taiwan linear guide.

3. The scraping glue adopts the design of the clamping lock, which can make the deformation and scraping glue adjust and ensure the grinding quality.

4. This automatic grinder, high speed grinder and precision grinder can be used for grinding mechanical and manual scrapers.

5. Special grinding wheel design, no pressure on the grinding belt, no distortion of scraping rubber, no corrugation phenomenon, to ensure grinding accuracy.

6, grinding angle to match various special printing efficiency.

7. Ceramic grinder equipped with dust-cleaning device can reduce industrial pollution and is beneficial to staff health and equipment maintenance.

8, ceramic grinding machine, high-speed grinding machine, precision grinding machine is easy to operate, no professional technology can be operated.

Points for attention (1):

1, the middle part of the drum is thin, thick at both ends, and may be convex in the drum, so the cooling water needs to be adjusted.

2, the two ends of the drum are thin, and the middle paint film is thick, so the cooling water needs to be reduced.

3, do not open cooling water is strictly prohibited from driving.

4. It is strictly forbidden to enter foreign bodies (such as metal blocks) in the middle of two rollers. If foreign bodies are inadvertently entered, emergency parking will be taken out. Otherwise, the roll surface or other parts will be damaged.

5. Always pay attention to adjusting the front and rear rollers. Because of the linear expansion of the drum, it is easy to die when working carelessly and even cause accidents when braking the motor.

6. The bracket copper baffle (tip) should not be pressed too tightly, and lubricating oil (which can be dissolved in the paint slurry) should be added at any time, otherwise it will wear quickly.

7, pay attention to the bearing temperature at the two ends of the roller, generally not more than 100.

Points for attention (two):

1. Before operation, first check the power supply pipe, whether the switch button is normal, whether the cooling circulating water is available, if all is normal, the power can be started.

2, attention should be paid to the abnormality during operation.

3, the operation should be fixed oil storage barrels, no oil overflow.

4. Operators should always pay attention to the presence or absence of debris on the rollers. If so, they should stop the machine immediately, so as to avoid affecting the quality and safety accidents.

5, when an operator wants to leave his post, he should be replaced.

6, if production is completed, the roller must be cleaned in time and the surrounding sanitation should be cleaned, and the relevant power switches should be switched off.